Traintheinspector Level 1 is a unique training package for the protective coatings industry. The training programme has been specifically developed for personnel who have an interest in surface treatment and corrosion control with the use of protective coatings.
Within the training modules you will find following International Standards and references used in the coatings industry.
The use of illustrations from the above organisations and standards is for training purposes only.
When conducting inspection duties always ensure you use the exact document or standards which will contain the full contents of the standard along with the quality images needed to use the standard or document.
All courses, course materials, and related services provided under this agreement are provided on an “as is” and “as available” basis.
SSPC disclaims all warranties, express or implied, oral or written, including implied warranties of merchantability, fitness for a particular purpose, title, and noninfringement, and any warranties from course of dealing, usage or trade practice.
The affiliate or registered company agrees that industry practices change periodically and that SSPC does not assume any liability or obligation for any failure to update information or the affiliates or registered companies use or misuse of any information presented as part of the course materials.
In the event any software is provided under this agreement as part of the course materials, SSPC does not warrant that the software will be free from interruptions or delays, is compatible with the affiliate or registered company operating environment or mobile device, or is free from malware, viruses, or harmful code.
The software may display or make available third party content which may be subject to additional terms and conditions. The affiliate or registered company acknowledges and agrees that SSPC is not responsible for third party content and SSPC does not assume any liability for your use of third party content.
All rights reserved. No part of the training material may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of Fitz-Coatings Limited.
Fitz-Coatings Limited, East Farm, Monkton Village, Jarrow, Tyne and Wear, NE32 5NN, United Kingdom.
The Industrial Coatings Applicator is a multi-disciplined task theat covers an enourmous amount of possible activities. This training course has been developed from basic principals to allow a new recruit entrance into the industry, training for an experienced person, and education to lead hands, engineers and assistants or third party personell. The training has been structured so that it can be completed step-by-step from the first unit to the last.
Six training modules have been developed all with a number of individual units.
A considerable amount of effort has been put into the health and safety unit and this is by far the most important module
This first module contains fourteen units and guides the user on a step-by-step basis through the somewhat complex aspect of health and safety.
The first unit wihin, is the generic 'company induction' unit. As each company's activities are wide ranging, this unit offers general guidelines on what an induction should contain.
It is widely accepted that the degree of surface preparation and level of cleanliness have a major bearing on the performance of a coating system.
Abrasive blast cleaning is by far the most efficiant and effective method of surface preparation.
This training course covers all aspects of surface preparation with the use of abrasive blast cleaning.
Six training modules have been developed with a number of units in each module.
Considerable emphasis is put on the health and safety, which compliments the health and safety in the Protective Coatings Application Training Course.
Within the Protective Coatings Application training you will find training units on basic paint application such as brush and roller application.
This training course was designed specifically for coating application with the use of airless spray equipment.
There is a section which covers air assisted conventional spray application, however the majority of industrial and marine coatings are applied by airless spray
Considerable emphasis is put on the health and safety which compliments the health and safety units in the industial coatings applicator and abrasive blast cleaning courses.
Within the site you will find training units for Protective Coatings Application, Abrasive Blast Cleaning and Spray Painting.
This section contains Specialist Modules and any additional units that have not been covered within the three main training courses.
Marine Publications International Limited (Ltd) trading as Corrodere.
Registered address: Peel House, Upper South View, Farnham, Surrey GU9 7JN.
The pages on the website are published by Marine Publications International Ltd on behalf of level1.traintheinspector.com (“level1.traintheinspector.com”, “us” or “we”).
We may collect the following information:
We collect this information to deliver tailored training courses and provide you with a better service, and in particular for the following reasons:
You may obtain a copy of any data stored by submitting a request to firstname.lastname@example.org or contacting Marine Publications International Limited at the address shown above.
The information we collect from registered users is kept indefinitely for the purposes outlined above.
You can request to have your details removed by submitting a deletion request to email@example.com or contacting Marine Publications International Limited at the address shown above.
We will process users’ personal data during the duration of training or contract and will continue to store only the personal data needed after completion of training to meet any legal obligations or for the purpose of renewals.
We do not pass on your personal information to any third parties for the purpose of marketing.
Your qualification level including your name and photograph may be made available to third parties upon request in the form of an ID Card
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online. Data is held in the UK.
A cookie is a small file which asks permission to be placed on your computer’s hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
Cookies ensure a consistent and efficient experience for visitors and perform essential functions such as allowing users to register and remain logged in.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
However, you may prefer to disable cookies on this site and on others. The most effective way to do this is to disable cookies in your browser. We suggest consulting the Help section of your browser or taking a look at the About Cookies Website which offers guidance for all modern browsers.
Our website may contain links to other websites of interest, such as our partner companies, whose services you may wish to use. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
In the event that you wish to make a complaint about how your personal data is being processed by us, you have the right to complain using the contact details within this policy.
If you do not get a response within 30 days, you can complain to the ICO.
ICO, Wycliffe House, Water Lane, Wilmslow, SK9 5AF
Tel +44 (0) 303 123 1113 or email: https://ico.org.uk/global/contact-us/email/
Please check that the website address you entered is correct as we host several training sites that use similar web addresses
If you have forgotten your password, enter the email address you registered with below then press 'Reset'. This will reset your password and email it to you
To understand where steam cleaning can be used as a method of preparation or a pre-cleaning process. The protective coating applicator may encounter this process
Limited content shown. Log in or request permission to view additional content including slideshows, animations and videos